Assembly Instructions
Watch our updated installation video on how easy it is to assemble the Amby Baby Motion Bed.
Click the play button below to start the video.
Assembly Instructions and User Guide
Tip: The Motion Bed must always be level, with bows tied tightly at either end. Your baby's head should always be slightly higher than his/her feet.
Leveling and adjusting the Motion Bed
(see the User Guide for detailed instructions and photos):
Step 1: Untie your bows and take all the fabric out of the "horns" on the side of the coat hanger.
Step 2: Next locate the Velcro® strips on the front and back end of the hammock hanger.
Step 3: Cinch the Velcro® strips together. The head side Velcro® will raise that side the more you cinch. To lower the head side, undo and re-adjust the Velcro®.
Step 4: Retie bows.
Step 5: If you find your baby is sliding toward the foot end of the hammock you can repeat the same steps to raise the foot end by cinching the front Velcro®. Don't raise the foot end too much—your baby's head should always be slightly higher than his/her feet.
|
